WaveWare Apollo T-2000 Informazioni Techniche Scaricare il pdf (Pagina 20)

Certification Manual

- 20 -

If the facility has brick or concrete block walls, then surface mounted

raceways and boxes will have to be used. Alliance uses self-adhesive

raceways such as “Panduit”, or “Wiremold” to run wire where it is

impossible to conceal it. Device boxes are secured to the wall by the use of

masonry screws, such as “Tapcons.” The holes for the tapcons are first

drilled and then the boxes are attached to the wall

by these self-threading masonry screws. This

can be a particularly noisy process, so be aware

of sleeping residents and clean up any dust that

you make. In conjunction with Panduit and

Wiremold, Alliance specifies single gang plastic

Panduit boxes, instead of old work boxes

whenever the component must be surface

mounted. These versatile device boxes can be

manipulated to many different applications. With pre-stamped knock-outs

they smoothly interface with panduit, and they are aesthetically pleasing.

Working in New Construction/Remodel

New construction is easier to run wire, as there are no finished walls

to slow progress down. The down side in new construction is that wires

should not be run too early in the construction process as other tradesmen

can easily damage them. When pulling wire, try and keep these other

trades such as HVAC, Plumbing, Electrical, Fire Sprinklers, etc. in mind so

that our wires will not interfere with their work. Ask the Construction

Foreman if you have any questions. The Alliance Project Manager will let

you know when to start the wire pull and box setting on a new job.

Due to the nature of new construction projects, it is not always

possible to complete an installation all at once. Often, we must break the

process down into various phases as we must wait on different contractors

Figure

5: Panduit

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 113 114

Nessun commento

WaveWare Apollo T-2000 Informazioni Techniche Pagina 20